Saltar al contenido
FTTH drop clamp ADSS Opgw Cable Fitting Clamp

FTTH drop clamp ADSS Opgw Cable Fitting Clamp

Designed to support both ends of 1 and 2-pair reinforced service drops, the drop wire clamps can withstand the rigors

of all environmental conditions in the telecommunications .outside plant. The placement of slots and a hole in the

clamp’s inner wedges allow for cable slack Adjustment, PROPER Tensioning, and Assistance with Re-entry. Used to

Support One drop and Telephone Wire AT TWO pair span Clamps, Hooks Drive, and Various Attachments drop.

FTTH drop clamp

5

This drop wire clamp is to connect a triplex overhead entrance cable to a devices or buildings.Widely used both indoor

installation and outdoor installation.Provided with a serrated shim to increase hold on drop wire. Used to support one

and two pair telephone drop wire at span clamps,drive hooks, and various drop attachments.

● Support and tension flat electrical wire

● Effective and time saving for cabling

 

 

¿Tiene un producto en mente?

Comparta la referencia del producto, la especificación y la cantidad.
Echemos un vistazo más de cerca a sus requisitos.

Iniciar una consulta