Morsetto a cuneo UT


NLD series bolt type tension clamps are mainly used in standing electric power line or substation, stationary conduction line and lightning conductor and also be used in jointing the strain insulators by joining hardware or jointing the lightning conductor with the perch.
NLD series bolt type tension clamps are mainly used in standing electric power line or substation, stationary conduction line and lightning conductor and also be used in jointing the strain insulators by joining hardware or jointing the lightning conductor with the perch.
NLD series bolt type tension clamps are mainly used in standing electric power line or substation, stationary conduction line and lightning conductor and also be used in jointing the strain insulators by joining hardware or jointing the lightning conductor with the perch.
Material: body, keeper – hot-dip galvanized steel, split pin – stainless steel, others – hot-dip galvanized steel.
Grip strength of the clamp is more than 95% break strength of the conductor.

|
Elemento |
Conduttore applicabile (mm) |
Dimensioni (mm) |
Carico di rottura (kN) |
Dimensione bullone |
||||
|
|
|
D |
C |
L1 |
L2 |
R |
|
|
|
NLD-1 |
5.0-10.0 |
16 |
18 |
150 |
120 |
6.5 |
18 |
2×M12 |
|
NLD-2 |
10.1-14.0 |
16 |
18 |
205 |
130 |
8 |
41 |
3×M12 |
|
NLD-3 |
14.1-18.0 |
18 |
22 |
310 |
160 |
11 |
71 |
4×M16 |
|
NLD-4 |
18.1-23.0 |
18 |
25 |
410 |
220 |
12.5 |
91 |
5×M16 |
Condividi il riferimento del prodotto, la specifica e la quantità.
Diamo un'occhiata più da vicino ai tuoi requisiti.
Ricerche suggerite