400A Oberleitungs-Service-Sicherungshalter


Modellmaße und Referenzdaten sind in den untenstehenden Produktinformationen aufgeführt.
Modellmaße und Referenzdaten sind in den untenstehenden Produktinformationen aufgeführt.
57 Series Tie-Top Type
Standard: ANSI C29.7-2015
Voltage:11-66kV
1. Tie Top Porcelain Line Post Insulators are designed for upright or angle mounting on a cross arm. They are rated from 25kV to 69kV in usual line voltage, and requiring a cantilever strength of 2800lb. For wood cross arm, long studs are supplied complete with large area flat washer ,square nut and lock nut. For steel cross arm, short studs are supplied with standard hex nuts and lock nuts.
2.Conductor grooves are the wide Tie Top ANSI standard type with head and neck designed for the use Wrap lock or conventional tie wires.
3.Gray glaze is standard for this ANSI type tie top porcelain line post insulators,Brown glaze can be supplied on order.
4.The ANSI standard No. for these Tie top porcelain line post insulators are: 57-1,57-2,57-3,57-4,57-5, with S or L after the number respectively represent short stud or long stud.For example : 57-1S means: short stud is supplied with 57-1 line post insulator.

| ANSI-Klasse |
57-1 |
57-2 |
57-3 |
57-4 |
| Creepage Distance (mm) |
356 |
559 |
737 |
1015 |
| Dry Arcing Distance (mm) |
165 |
241 |
311 |
368 |
| Cantilever Strength (kN) |
12.5 |
12.5 |
12.5 |
12.5 |
| Low Frequency Flashover Voltage-Dry (kV) |
70 |
100 |
125 |
140 |
| Low Frequency Flashover Voltage-Wet (kV) |
50 |
70 |
95 |
110 |
| Critical Impulse Flashover Voltage-Pos. (kV) |
120 |
160 |
200 |
230 |
| Test Voltage to Ground (kV) |
15 |
22 |
30 |
44 |
| Maximum RIV at 1000KHZ (µv) |
100 |
100 |
200 |
200 |
| Net Weight (kg) |
4.8 |
7.8 |
11.0 |
18.0 |
Teilen Sie die Produktreferenz, die Spezifikation und die Menge.
Schauen wir uns Ihre Anforderungen genauer an.
Vorgeschlagene Suchen