Salta al contenuto

Isolatore di linea per palo, serie 57, tipo Tie-Top

Le dimensioni del modello e i dati di riferimento sono riportati nelle informazioni sul prodotto qui sotto.

Panoramica

Le dimensioni del modello e i dati di riferimento sono riportati nelle informazioni sul prodotto qui sotto.

Informazioni sul prodotto

57 Series Tie-Top Type
Standard: ANSI C29.7-2015
Voltage:11-66kV
1. Tie Top Porcelain Line Post Insulators are designed for upright or angle mounting on a cross arm. They are rated from 25kV to 69kV in usual line voltage, and requiring a cantilever strength of 2800lb. For wood cross arm, long studs are supplied complete with large area flat washer ,square nut and lock nut. For steel cross arm, short studs are supplied with standard hex nuts and lock nuts.
2.Conductor grooves are the wide Tie Top ANSI standard type with head and neck designed for the use Wrap lock or conventional tie wires.
3.Gray glaze is standard for this ANSI type tie top porcelain line post insulators,Brown glaze can be supplied on order.
4.The ANSI standard No. for these Tie top porcelain line post insulators are: 57-1,57-2,57-3,57-4,57-5, with S or L after the number respectively represent short stud or long stud.For example : 57-1S means: short stud is supplied with 57-1 line post insulator.
Isolatore in vetro

Classe ANSI

57-1

57-2

57-3

57-4

Creepage Distance (mm)

356

559

737

1015

Dry Arcing Distance (mm)

165

241

311

368

Cantilever Strength (kN)

12.5

12.5

12.5

12.5

Low Frequency Flashover Voltage-Dry (kV)

70

100

125

140

Low Frequency Flashover Voltage-Wet (kV)

50

70

95

110

Critical Impulse Flashover Voltage-Pos. (kV)

120

160

200

230

Test Voltage to Ground (kV)

15

22

30

44

Maximum RIV at 1000KHZ (µv)

100

100

200

200

Net Weight (kg)

4.8

7.8

11.0

18.0

Isolatore di linea per palo, serie 57, tipo Tie-Top

Hai un prodotto in mente?

Condividi il riferimento del prodotto, la specifica e la quantità.
Diamo un'occhiata più da vicino ai tuoi requisiti.

Avvia una richiesta