वह bolt-type parallel groove कनेक्टर्स is made of plate-plate structure and aluminum alloy material. Relying on the fastening pressure of the bolt, the connected
wire is fixed in the upper and lower grooved splints to complete the connection, and then transmitted through flat washers and spring washers. Provides a relatively
uniform and constant pressure to the connecting wire. It can be disassembled after installation. It is often used at the jumper or ground wire lap joint at the strain
end of the line to ensure that the कनेक्टर्स has sufficient and even pressure on the wire. The कनेक्टर्स generally adopts a two-bolt or three-bolt structure, and
the installation requires uniform force when tightening the bolts. Sometimes in order to ensure the reliability of operation, two or three कनेक्टर्सs are connected
in parallel at equal intervals during line construction. The holding force of the bolt-type parallel groove कनेक्टर्स to the wire is about 10%-20% of the calculated
breaking force of the wire.
Bolt-type equal-diameter parallel groove कनेक्टर्सs generally only connect wires of the same diameter. The allowable wire span generally includes two adjacent
specifications. For example, the applicable wire cross-sections of JBL-4 parallel groove कनेक्टर्सs are 185mm2 and 240mm2. Therefore, a symmetrical design is
adopted in the structure.
The bolt-type reducing diameter and groove कनेक्टर्स allows continuous span combination of wires with a certain diameter range. The structure adopts an
asymmetrical design, and the pressure plate is designed to be adjustable from left to right to ensure that both different diameter wires can be contacted. A more
stable pressure is obtained, but human factors have a greater influence on the degree of bolt tightening.





