सामग्री पर जाएँ

हीट-श्रिंक बसबार इंसुलेशन ट्यूबिंग

Add insulation between busbars in medium-voltage substations up to 36 kV. This heat-shrink tubing is intended to reduce required electrical clearance and provides resistance to tracking, corrosion, UV exposure and weathering for insulated busbar applications.

  • For substations up to 36 kV
  • Anti-tracking insulation
  • UV- and weather-resistant tubing

अवलोकन।

Add insulation between busbars in medium-voltage substations up to 36 kV. This heat-shrink tubing is intended to reduce required electrical clearance and provides resistance to tracking, corrosion, UV exposure and weathering for insulated busbar applications.

Heat Shrink Bus-bar Insulation Tubing

विनिर्देश।

अपने आइटम नंबर को नीचे दिए गए आयामों और रेटिंग्स के साथ मिलाएं।

विनिर्देश
परीक्षणपरीक्षण विधिआवश्यकता
तन्य शक्तिASTM D 2671≥11.8MPa
विरूपण-विच्छेदन पर विस्तारASTM D 2671700%
tensile strength after heat agingASTM D 2671/120℃,168小h≥10MPa
ऊष्मा वृद्धावस्था के बाद टूटने पर विस्तारASTM D 2671/120℃,168h≥500%
अनुदैर्ध्य संकोचनASTM D 26710 to-10%
Electrical strengthIEC 243≥20KV/mm
Dielectric constantIEC 2503.0 Max
आयतन विद्युत प्रतिरोधकताIEC 9310 13 Ω.cm
Flame retardancy (oxygen index)ASTM 4589≥25
Copper corrosive 120 ° C, 168 hoursASTM D 2671पास करें
Low temperature brittleness -40 ° C, 4 hoursASTM D 2671No crack
Water absorption rateISO 62/23℃,14 days≤0.5%
हीट-श्रिंक बसबार इंसुलेशन ट्यूबिंग

क्या आपके मन में कोई उत्पाद है?

उत्पाद संदर्भ, विनिर्देश और मात्रा साझा करें।
आइए आपकी आवश्यकताओं पर और नज़दीक से नज़र डालें।

एक पूछताछ शुरू करें