सामग्री पर जाएँ

CT8 मल्टीपल ड्रॉप वायर क्रॉस-आर्म ब्रैकेट्स

उत्पाद जानकारी:

अवलोकन

उत्पाद जानकारी:

उत्पाद जानकारी

उत्पाद जानकारी:

Allows multiple drop wire dead-ends in all directions on wood or metal poles.

सामग्री: हॉट डिप गैल्वनाइज्ड स्टील।

The information of this item:

The cross arm is the important part of the tower, its function is used to install the insulator and the hardware to support the wire,overhead

ground wire, and to keep a certain safety according to regulations

This was designed to use on overhead telecommunication lines, for attaching fiber optic cable fittings. The universal console for wooden or

concrete poles can anchor or suspension fiber optic cable accessories with maximum capacity of 8 strain connections and suspension of 4 lines.

Telecommunication bracket is made of hot dip galvanized steel. Design of Fiber optic cable bracket is unique and allows covering almost al

l the possible configurations for pole attaching of fiber clamp and fittings.

स्टेनलेस स्टील बैंड और बकल या पोल हुक कंसोल की स्थापना के लिए उपयुक्त हैं।

पूरे केबल हार्डवेयर ने तनाव परीक्षण, संक्षारण प्रतिरोध परीक्षण पास कर लिए हैं।

安装1~1 2

PERFORMANCES

Mechanical resistance at its extremity: 100daN

Hole spacing: 40mm

Dimensions: 325×75.5 x 40mm

TECHNICAL SPECIFICATIONS

No bracket is required for installing on poles

Mounts on any type of pole

Installs with pole band or with bolt and lag screw.Compact cross-arm construction,optimal solution for drop cabling

INSTALLATION

cross-arm steel plate with 8 holes secures on wooden metal poles with two pole bands 20×0.7 mm (SB207) and on per-drilled wooden

poles with one 14mm/16mm bolt and one 12mm lag screw (to be ordered separately).

 

CT8 मल्टीपल ड्रॉप वायर क्रॉस-आर्म ब्रैकेट्स

क्या आपके मन में कोई उत्पाद है?

उत्पाद संदर्भ, विनिर्देश और मात्रा साझा करें।
आइए आपकी आवश्यकताओं पर और नज़दीक से नज़र डालें।

एक पूछताछ शुरू करें