Heat-Shrink Busbar Insulation Tubing


Seal the ends of power cables, lines and pipes with an adhesive-coated heat-shrink cap. The cap protects against humidity and is described as UV- and corrosion-resistant, with listed sizes accommodating application diameters from 6 to 120 mm.
Seal the ends of power cables, lines and pipes with an adhesive-coated heat-shrink cap. The cap protects against humidity and is described as UV- and corrosion-resistant, with listed sizes accommodating application diameters from 6 to 120 mm.
Heat Shrink End Cap
Abbina il tuo codice articolo alle dimensioni e alle valutazioni qui sotto.
| Test | Test Method | Requirement |
|---|---|---|
| Resistenza a trazione | ASTM D 2671 | >11MPa |
| Elongation at break | ASTM D 2671 | >400% |
| Elongation at break after heat aging | ASTM D 2671 | >300% |
| Volume resistivity | IEC 93 | 10 13 Ω.cm |
| Dielectric strength | IEC 243 | >15KV/mm |
| Tipo | Application Diameter Range (mm) | Expanded(mm) | Recovered(mm) | ||||
|---|---|---|---|---|---|---|---|
| D(min) | L1(min) | A(±10%) | d(max) | L2(min) | W(min) | ||
| MRSM15/5 | 6-12 | 15 | 40 | 20 | 5 | 40 | 2.1 |
| MRSM22/8 | 9-18 | 22 | 54 | 30 | 8 | 50 | 2.5 |
| MRSM35/15 | 16-28 | 35 | 82 | 35 | 15 | 70 | 2.8 |
| MRSM55/25 | 28-44 | 55 | 108 | 50 | 25 | 85 | 3.2 |
| MRSM75/35 | 40-67 | 75 | 120 | 55 | 35 | 95 | 3.2 |
| MRSM30/60 | 65-120 | 130 | 150 | 70 | 60 | 105 | 3.4 |
Condividi il riferimento del prodotto, la specifica e la quantità.
Diamo un'occhiata più da vicino ai tuoi requisiti.
Ricerche suggerite