Fuse Cut Out

We have now a skilled, performance group to offer excellent support for our consumer. We usually follow the tenet of customer-oriented, details-focused for Fuse Cut Out, Nfc33021, Mounting Bracket, High Voltage Line Accessories, The many thoughts and suggestions is going to be drastically appreciated! The great cooperation could boost each of us into better development! We are experienced manufacturer. Wining the majority from the crucial certifications of its market for Fuse Cut Out, We would very much welcome an opportunity to do business with you and have pleasure in attaching further details of our products. Excellent quality, competitive prices,punctual delivery and dependable service can be guaranteed.


  • Best Price on Hot Dip Galvanized Bolt And Nut - Dielectric Suspension clamp – Yongjiu

    Best Price on Hot Dip Galvanized Bolt And Nut - Dielectric Suspension clamp – Yongjiu

    The DS dielectric suspension clamp is used for suspension of ADSS cables at intermediate poles on cable routes with angle < 20° on access networks (spans up to 100 m). Item No. Conductor(mm) D58 8-12 DS12 12-16 This item was made by Nylon 66 and rubber. Nylon-66 is a thermoplastic resin. White solid. Insoluble in general solvents, only soluble in m-cresol etc. The mechanical strength and hardness are high, and the rigidity is great. Rubber refers to a highly elast...
  • PriceList for Supplier Ftth - AC-H-6 Dead End Clamp for Fiber Cable – Yongjiu

    PriceList for Supplier Ftth - AC-H-6 Dead End Clamp for Fiber Cable – Yongjiu

    AC-H-6 Dead End Clamp for fiber cable is designed to fix and keep the tensile state of fiber. Clamp body is made of galvanized steel or chrome plated element. Usually the fiber laying around the electric transmission line or laying on the building whose space is less than 70m. No special tools are required Item No. Conductor(mm) Breaking Load(KN) AC-H-6 2×(3-6) 2 This dead end clamp usually applied in the telecommunication networks construction. And our key features a...
  • 2020 Latest Design Galvanized D Shackle - YJPT suspension clamp(Type movable) – Yongjiu

    2020 Latest Design Galvanized D Shackle - YJPT suspension clamp(Type movable) – Yongjiu

    The YJPT suspension clamp is designed for unholding of low voltage fully supported A.B.C(Aerial Bundled Conductors). It is suitable for angle poles up to 30° The body, the tightening screw and the washer are made of hot dip galvanized steel The insert made of UV resistant Synthetic material ensures a good upholding of the A.B.C No loose parts Standard: VDE 0211 Item No. Cross Section(mm2) Breaking Load(KN) YJPT25 4×(16-25) 8 YJPT50 4×(25-50) 8 YJPT95 4×(70-95) 8 YJPT120 4×(70-120)...
  • 2020 Latest Design Galvanized D Shackle - PT Suspension Clamp(Type fixed) – Yongjiu

    2020 Latest Design Galvanized D Shackle - PT Suspension Clamp(Type fixed) – Yongjiu

    The PT suspension clamp is designed for unholding of low voltage fully supported A.B.C(Aerial Bundled Conductors). It is suitable for angle poles up to 30° The body, the tightening screw and the washer are made of hot dip galvanized steel The insert made of UV resistant Synthetic material ensures a good upholding of the A.B.C No loose parts Standard: VDE 0211 Item No. Material Conductor(mm) Breaking Load(KN) PT-1 Rubber, Steel 8-12 10 PT-2 Rubber,steel 10-15 10 ...
  • Top Suppliers Silicone Rubber Sleeve - Concrete Pole Steel Plate – Yongjiu

    Top Suppliers Silicone Rubber Sleeve - Concrete Pole Steel Plate – Yongjiu

    Installation of cross arm 5/19 on square concrete poles and of suspension 30/34 on cross-arm. Installed on poles by two 20 mm bands and on cross arm by 2 bolts 1/12.   Item No. Designation 5/39 Pole steel plate Cross-arm brackets 5/19 was used for the installation of cross-arms on concrete poles used for low voltage (LV) networks. They hoop on the pole with the use of 2 steel pole bands 20 x 0.7mm. Two cross-arm brackets are required for the fixing of a single cross-arm. These hard...
  • Manufactur standard Rubber Protective Boot - Multiple Drop Wire Cross-arm Brackets – Yongjiu

    Manufactur standard Rubber Protective Boot - Multiple Drop Wire Cross-arm Brackets – Yongjiu

    Allows multiple drop wire dead-ends in all directions on wood or metal poles. Material: Hot dip galvanized steel. Item No. Width(mm) CT8 325 Short Description:  Earth Rod Accessories 1.  Coupling: made of brass and counter bored to make certain the threads of the Earth Rods are completely enclosed. 2.Ground rod driving heads: this accessory will be of high strength steel, threaded to fit the ground rod couplings, the design is ensure that there is direct driving head to rod cont...
  • Rapid Delivery for Pole Line Hardware - YJPT suspension clamp(Type movable) – Yongjiu

    Rapid Delivery for Pole Line Hardware - YJPT suspension clamp(Type movable) – Yongjiu

    The YJPT suspension clamp is designed for unholding of low voltage fully supported A.B.C(Aerial Bundled Conductors). It is suitable for angle poles up to 30° The body, the tightening screw and the washer are made of hot dip galvanized steel The insert made of UV resistant Synthetic material ensures a good upholding of the A.B.C No loose parts Standard: VDE 0211 Item No. Cross Section(mm2) Breaking Load(KN) YJPT25 4×(16-25) 8 YJPT50 4×(25-50) 8 YJPT95 4×(70-95) 8 YJPT120 4×(70-120)...
  • 2020 Good Quality Parallel Clamp - Dielectric Suspension clamp – Yongjiu

    2020 Good Quality Parallel Clamp - Dielectric Suspension clamp – Yongjiu

    The DS dielectric suspension clamp is used for suspension of ADSS cables at intermediate poles on cable routes with angle < 20° on access networks (spans up to 100 m). Item No. Conductor(mm) D58 8-12 DS12 12-16 This item was made by Nylon 66 and rubber. Nylon-66 is a thermoplastic resin. White solid. Insoluble in general solvents, only soluble in m-cresol etc. The mechanical strength and hardness are high, and the rigidity is great. Rubber refers to a highly elast...
  • Manufactur standard Rubber Protective Boot - PT Suspension Clamp(Type fixed) – Yongjiu

    Manufactur standard Rubber Protective Boot - PT Suspension Clamp(Type fixed) – Yongjiu

    The PT suspension clamp is designed for unholding of low voltage fully supported A.B.C(Aerial Bundled Conductors). It is suitable for angle poles up to 30° The body, the tightening screw and the washer are made of hot dip galvanized steel The insert made of UV resistant Synthetic material ensures a good upholding of the A.B.C No loose parts Standard: VDE 0211 Item No. Material Conductor(mm) Breaking Load(KN) PT-1 Rubber, Steel 8-12 10 PT-2 Rubber,steel 10-15 10 ...
  • factory customized Nfc33020 - OPTIC Line Accessory – Yongjiu
  • Good quality Cable Lug - C-350 FTTH drop clamp – Yongjiu

    Good quality Cable Lug - C-350 FTTH drop clamp – Yongjiu

    C-350 FTTH drop clamp C-350 FTTH drop clamp is designed for suspension or tension round or flat FTTH fiber optic cable or drop wire cable in FTTX construction or telephone drop wires.   Item No. Conductor(mm) Breaking Load(KN) C-350 Round 2-5 Flat 2×5 0.5 Application: Used for securing many kinds of cables, such as fiber optic cables. Used to relieve strain on messenger wire. Used to support telephone drop wire at span clamps, drive hooks and various drop attachments...
  • OEM/ODM Factory Fiber Cable Fittings - OPTIC Line Accessory – Yongjiu