The CSC Curved suspension clamp is used to suspension of copper-figure-8 cables directly by bolt or strip.

Suspension clamps CSC enable the suspension of optical or coax figure-8 cables with steel or dielectric (FRP) messenger, laid on distribution networks with aligned or angles < 15° configurations.
For spans greater than 90° and wider angles, it is recommended to install a double anchoring.
The suspension clamps can be directly secured to the poles using bolts or bandings.

Forging is a processing method that uses forging machinery to apply pressure to metal blanks to produce plastic deformation to obtain forgings with certain mechanical properties, certain shapes and sizes. Forging (forging and stamping) is one of the two major components. Forging can eliminate defects such as loose as-cast during the smelting process and optimize the microstructure. At the same time, due to the preservation of complete metal flow lines, the mechanical properties of forgings are generally better than castings of the same material. For the important parts of related machinery with high load and severe working conditions, forgings are mostly used except for simpler shapes that can be rolled, profiles or welded parts.

Polyamide plastic products are widely used as various mechanical and electrical parts, including bearings, gears, pulley pump impellers, blades, high-pressure seals, gaskets, valve seats, bushings, oil pipelines, oil reservoirs, ropes, transmission belts, grinding wheel adhesives , Battery boxes, electrical coils, cable joints, etc.

They can also be installed on hook bolts to provide some flexible suspension point and give extra protection to the cable against wind induced vibrations

We have more than 30 years experience in this flied and our products have been exported to more than 40 countries and they are sold well in those countries and regions. Our products are absolutely superior in quality and reasonable in price.
Any questions just contact us freely.

Q:CAN YOU HELP US IMPROT AND EXPORT?