Ftth Accessories

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future alongside one another with your esteemed enterprise for Ftth Accessories, Nfc33021, Adss Cable Tension Clamp, Copper Bonded Earth Rod, Our final target is "To consider the most effective, To be the Best". Please experience cost-free to call with us if you have any prerequisites. "Based on domestic market and expand abroad business" is our progress strategy for Ftth Accessories, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!


  • Popular Design for Power Line Fitting - Dead-ending Of Round ADSS Fiber Optic Cables – Yongjiu

    Popular Design for Power Line Fitting - Dead-ending Of Round ADSS Fiber Optic Cables – Yongjiu

    Hot dip galvanized spiral dead-ends without armored rods for a direct installation on the cable for works on short spans (70 m max.); Hot dip galvanized amored rods for a direct protection on the cable and a spiral dead-end for anchoring cables on medium spans (150 m max.) and long spans (350 m max.). In addition to these amored rods and this dead-end, various accessories should be ordered separately to complete to complete the pole configuration (thimble, turnbuckle, bracket, etc.).   ...
  • professional factory for Fuse Cut Out - Concrete Pole Steel Plate – Yongjiu

    professional factory for Fuse Cut Out - Concrete Pole Steel Plate – Yongjiu

    Installation of cross arm 5/19 on square concrete poles and of suspension 30/34 on cross-arm. Installed on poles by two 20 mm bands and on cross arm by 2 bolts 1/12.   Item No. Designation 5/39 Pole steel plate Cross-arm brackets 5/19 was used for the installation of cross-arms on concrete poles used for low voltage (LV) networks. They hoop on the pole with the use of 2 steel pole bands 20 x 0.7mm. Two cross-arm brackets are required for the fixing of a single cross-arm. These hard...
  • China New Product Thimble - ADSS Cable Fittings Suspension Set – Yongjiu

    China New Product Thimble - ADSS Cable Fittings Suspension Set – Yongjiu

    The suspension set is used for the OPGW optic fiber cables.     Item No. LJG/T1179-1983 Length of cable clamp(mm) Weight of cable clamp(KG)   Nominal cross-section(mm2) Outer diameter(mm) Single vibration damper Double vibration damper Single vibration damper Double vibration damper ADL-95 95 12.48 1020 1350 1.1 2 ADL-120 120 14.25 1120 1470 1.4 2.4 ADL-150 150 15.75 1270 1680 1.5 2.4 ADL-185 185 17.50 1380 ...
  • Factory directly Accessories - C-350 FTTH drop clamp – Yongjiu

    Factory directly Accessories - C-350 FTTH drop clamp – Yongjiu

    C-350 FTTH drop clamp C-350 FTTH drop clamp is designed for suspension or tension round or flat FTTH fiber optic cable or drop wire cable in FTTX construction or telephone drop wires.   Item No. Conductor(mm) Breaking Load(KN) C-350 Round 2-5 Flat 2×5 0.5 Application: Used for securing many kinds of cables, such as fiber optic cables. Used to relieve strain on messenger wire. Used to support telephone drop wire at span clamps, drive hooks and various drop attachments...
  • Hot sale Factory Nfc33021 - YJPT suspension clamp(Type movable) – Yongjiu

    Hot sale Factory Nfc33021 - YJPT suspension clamp(Type movable) – Yongjiu

    The YJPT suspension clamp is designed for unholding of low voltage fully supported A.B.C(Aerial Bundled Conductors). It is suitable for angle poles up to 30° The body, the tightening screw and the washer are made of hot dip galvanized steel The insert made of UV resistant Synthetic material ensures a good upholding of the A.B.C No loose parts Standard: VDE 0211 Item No. Cross Section(mm2) Breaking Load(KN) YJPT25 4×(16-25) 8 YJPT50 4×(25-50) 8 YJPT95 4×(70-95) 8 YJPT120 4×(70-120)...
  • OEM manufacturer Termination Kit - Concrete Pole Steel Plate – Yongjiu

    OEM manufacturer Termination Kit - Concrete Pole Steel Plate – Yongjiu

    Installation of cross arm 5/19 on square concrete poles and of suspension 30/34 on cross-arm. Installed on poles by two 20 mm bands and on cross arm by 2 bolts 1/12.   Item No. Designation 5/39 Pole steel plate Cross-arm brackets 5/19 was used for the installation of cross-arms on concrete poles used for low voltage (LV) networks. They hoop on the pole with the use of 2 steel pole bands 20 x 0.7mm. Two cross-arm brackets are required for the fixing of a single cross-arm. These hard...
  • 100% Original Factory Abc Accessories - Concrete Pole Steel Plate – Yongjiu

    100% Original Factory Abc Accessories - Concrete Pole Steel Plate – Yongjiu

    Installation of cross arm 5/19 on square concrete poles and of suspension 30/34 on cross-arm. Installed on poles by two 20 mm bands and on cross arm by 2 bolts 1/12.   Item No. Designation 5/39 Pole steel plate Cross-arm brackets 5/19 was used for the installation of cross-arms on concrete poles used for low voltage (LV) networks. They hoop on the pole with the use of 2 steel pole bands 20 x 0.7mm. Two cross-arm brackets are required for the fixing of a single cross-arm. These hard...
  • 2020 High quality Bimetallic Pg Clamp - ADSS Cable Fittings Suspension Set – Yongjiu

    2020 High quality Bimetallic Pg Clamp - ADSS Cable Fittings Suspension Set – Yongjiu

    The suspension set is used for the OPGW optic fiber cables.     Item No. LJG/T1179-1983 Length of cable clamp(mm) Weight of cable clamp(KG)   Nominal cross-section(mm2) Outer diameter(mm) Single vibration damper Double vibration damper Single vibration damper Double vibration damper ADL-95 95 12.48 1020 1350 1.1 2 ADL-120 120 14.25 1120 1470 1.4 2.4 ADL-150 150 15.75 1270 1680 1.5 2.4 ADL-185 185 17.50 1380 ...
  • Original Factory Power Line Hardware - S type FTTH Drop Clamp – Yongjiu

    Original Factory Power Line Hardware - S type FTTH Drop Clamp – Yongjiu

    S type FTTH Drop Clamp is designed to anchor steel wire diameter up to 3mm of FRP messenger of drop cable in aerial outdoor FTTH construction. Item No. Conductor(mm) Breaking Load(KN) S type 2.0-3.0 or 2.0-5.0 0.5 Application: Used for securing many kinds of cables, such as fiber optic cables. Used to relieve strain on messenger wire. Used to support telephone drop wire at span clamps, drive hooks and various drop attachments. Features: Good anti-corrosion performanc...
  • OEM China 11kv Termination Kit - OPTIC Line Accessory – Yongjiu
  • OEM Supply Ftth Accessories - YJPT suspension clamp(Type movable) – Yongjiu

    OEM Supply Ftth Accessories - YJPT suspension clamp(Type movable) – Yongjiu

    The YJPT suspension clamp is designed for unholding of low voltage fully supported A.B.C(Aerial Bundled Conductors). It is suitable for angle poles up to 30° The body, the tightening screw and the washer are made of hot dip galvanized steel The insert made of UV resistant Synthetic material ensures a good upholding of the A.B.C No loose parts Standard: VDE 0211 Item No. Cross Section(mm2) Breaking Load(KN) YJPT25 4×(16-25) 8 YJPT50 4×(25-50) 8 YJPT95 4×(70-95) 8 YJPT120 4×(70-120)...
  • professional factory for Fuse Cut Out - YJPT suspension clamp(Type movable) – Yongjiu

    professional factory for Fuse Cut Out - YJPT suspension clamp(Type movable) – Yongjiu

    The YJPT suspension clamp is designed for unholding of low voltage fully supported A.B.C(Aerial Bundled Conductors). It is suitable for angle poles up to 30° The body, the tightening screw and the washer are made of hot dip galvanized steel The insert made of UV resistant Synthetic material ensures a good upholding of the A.B.C No loose parts Standard: VDE 0211 Item No. Cross Section(mm2) Breaking Load(KN) YJPT25 4×(16-25) 8 YJPT50 4×(25-50) 8 YJPT95 4×(70-95) 8 YJPT120 4×(70-120)...