Heat Shrink Skirt

Short Description:


Product Detail

Product Tags

Application
1.Used for medium voltage termination up to 36kV
2.Increase creepage distance,scatter rain,for outdoor use only
Feature
1.Anti-tracking
2.Excellent corrosion resistance
3.UV resistance and weathering resistance
4.Superior electrical and mechanical properties

The production of heat shrinkable tubing must first select the appropriate masterbatch, and then select the auxiliary materials to produce specific
The thermal housing casing.
1. The production process of heat shrinkable tube is firstly the production of polyene leech masterbatch: combining various polyene leech base materials with various functional auxiliary materials
The materials are weighed according to the formula ratio and then mixed: the mixed materials are put into a twin-screw extruder and pelletized to produce a polyene leech functional masterbatch.
2. Product molding process: according to the shape of the product, two methods of single screw extrusion and injection molding can be used.
For processing and production:
1. Single-screw extrusion type: mainly used for extrusion molding of heat sink pipes, such as single-wall heat-shrinkable tubes, double-wall heat-shrinkable tubes with glue, and medium thickness
Wall heat sink pipes, high pressure busbar heat sink pipes, high temperature heat shrinkable pipes and other products are all processed and formed by single screw extrusion.
The heat shrinkable tube production line should have the following equipment: extruder (heat sink tube forming), production mold, cooling water tank, tension device, and
Disk device, etc.
2. Injection molding: mainly used for the production of heat-shrinkable special-shaped parts, such as heat sink caps, heat-shrinkable umbrella skirts, heat-shrinkable finger cots and other products
They all use injection molding, and production equipment should include injection molding machines and injection molds.
3. The next important step is radiation cross-linking. The products formed by extrusion or injection molding are still linear molecular structures.
Structure, the product does not yet have the “memory function”, and the performance of temperature resistance, aging resistance, and wear resistance is not enough.
Change the molecular structure of the product. The method we usually use is radiation crosslinking modification: electron accelerator radiation crosslinking, cobalt source radiation
Cross-linking, peroxide chemical cross-linking, at this time the molecule changes from a linear molecular structure to a network structure. Extruded products are passing
After cross-linking, it has a “memory effect”, which greatly enhances the temperature resistance, mechanical properties, and chemical properties of the heat shrinkable tube. The specific table
Now the heat sink tube has changed from the state of tolerance to incompatible, aging resistance, abrasion resistance, and chemical corrosion resistance.
4. Expansion molding: The product modified by radiation crosslinking already has a “shape memory effect”, and it has a high
Non-melting performance under temperature. After heating at high temperature, vacuum blowing and cooling, it becomes the finished heat shrinkable tube, and then according to the tube
The actual situation of the finished product packaging and closing can also be cut and printed according to customer needs. Neutral normal packaging is also available.
Heat Shrink Boots

Performance

 

Test Test Method Requirement
Tensile strength ASTM D 2671 ≥13 Mpa
Elongation at break ASTM D 2671 >400%
Tensile strength after heat aging ASTM D 2671/120℃,168h ≥10 Mpa
Elongation at break after heat aging ASTM D 2671/120℃,168h ≥350%
Volume resistivity IEC 93 1013Ω.cm
Electric constant IEC 250 3.0 Max
Dielectrical strength IEC 243 ≥15KV/mm
Copper corrosive 120 ° C, 168 hours ASTM D 2671 Pass
Longitudinal shrinkage ASTM D 2671 0 to-10%
Water absorption rate ISO 62 ≤0.1%
Flame retardancy (oxygen index) ASTM 4589 ≥25

 

Type

Expanded (mm)

Recovered(mm)

D1 D2 D2(max) H W
DQ1

97

35

15

20

2.5

DQ2

97

40

15

20

2.5

DQ3

110

45

20

20

3

DQ4

110

50

20

20

3

DQ5

125

70

30

25

4

  

Type

D

W
  Expanded (mm) Recovered(mm) Recovered(mm)
SQ1

32

12

3

SQ2

38

15

3

SQ3

45

22

3

全球搜详情_03Q:CAN YOU HELP US IMPROT AND EXPORT?

A:We will have a professional team to serve you.

Q:WHAT’S THE CERTIFICATES DO YOU HAVE?

A:We have certificates of ISO,CE, BV,SGS.

Q:WHAT’S YOUR WARRANTY PERIOD?

A:1 year in general.

Q:CAN YOU DO OEM SERVICE?

A:YES,we can.

Q:WHAT YOU LEAD TIME?

A:Our standard models are in stock ,as for big orders ,it take about 15 days.

Q:CAN YOU PROVIDE FREE SAMPLES?

A:Yes,please contact us to know the sample policy.


  • Previous:
  • Next:

  • Write your message here and send it to us