News
-
Learn Insulation Piercing Connector Manufacturers in Ten Minutes
Insulation Piercing Connector It is used for the branch connection of insulated cables of building power distribution system, low-voltage overhead insulated cable connection, low-voltage insulated household cable branch, street lamp power distribution system, etc. Main line: insulated copper or ...Read more -
Cable clamp and cable clamp assembly
A cable clamp has a body, at least one front binding hole, at least one rear binding hole, multiple front connecting elements,multiple rear connecting elements, a first lateral connecting element and a second lateral connecting element. The front and the rear connecting elements are formed on the...Read more -
Suspension clamp, especially for electrical overhead line, and support using such a clamp
Suspension clamp, especially for electrical overhead line, and support using such a clamp The clamp comprises an upper section for connecting to a support, a lower section with a cradle for the cable, and an aperture for inserting it. The clamp also incorporates a bracket with a locking system...Read more -
Research on the Strands Fracture Caused by Poor Compression in the Strain Clamp
Poor compression in the strain clamp often makes the strands overheat and fracture.There exists a certain gap between conductors and the strain clamp if the strain clamp is compressed poorly.The ashes, oxide, corrosion and abrasion tend to gather and scale in the gap, forming scale layers of hi...Read more -
Anchor clamp for insulated overhead lines
An anchor clamp for insulated free leads, having a clamp body which has a C-type cross-sectional profile with two opposingly open grooves, of which the one groove is provided with projections in the longitudinal zone forming one flank, which projections protrude into the groove at a distance from...Read more -
What is the insulation piercing clamp? What is the appropriate sub-item if it is fixed?
1. insulation piercing clamp is a branch wiring clamp when there is a branch line in the middle of the conductor trunk or the cable trunk. 2. The quota sub-item of the crimping terminal should be sleeved, and the unit price of the main material should be adjusted and converted. 3. The sub-item co...Read more -
Eye Bolts – Metal Fasteners
One of the most commonly used pieces of hardware in material handling, an eye bolt has a simple design,consisting of a threaded shank with a ring/eye at one end. Eye bolts are threaded to structures such as wood or steel posts and often supported by a nut. They are designed to have a rope or cabl...Read more -
Shrinkable sleeve adapted for cable and tubing gas flow blocking
A compact one-piece shrinkable sleeve of minimal outside diameter made from either a resilient material or a heat shrinkable material having elastic memory and adapted to be secured to the end of an electrical cable and/or tubing bundle having one or more electrical conductors and/or tubes extend...Read more -
Tension clamp for cable supporting an insulated electrical conductor or for an insulated electrical cable
Tension clamp of the type including a sheath provided with an anchoring element and a tapered cavity inclined at a slight angle. In the cavity is a slidably mounted, transversely movable core including a single jaw having an abutting face against the cable. A part of the cavity of the sheath serv...Read more -
What is JBC insulation piercing clamp
The JBC insulation piercing clamp is suitable for the connection of the branch line from the main line in the low-voltage insulated circuit, or for the connection of the jumper between two tensile sections. The clamp is equipped with special contact teeth to ensure the best contact surface. It is...Read more -
Cable Lugs Crimp Type
Cable lugs with a high quality insulation and appropriate crimp profiles ensures that the insulation does not become damaged during the cable crimping operation. The quad point crimp originates in the USA and is being used mainly in panels and switch cabinets up to 1000V. What ki...Read more -
how wire wedge clamp works
A wedge clamp for clamping a plurality of planar members in a side-by-side disposition for work such as gluing to be performed thereon. The wedge clamp includes a rail unit which defines a track having two opposing side walls and an end wall disposed in a U-shaped configuration to closely recei...Read more